Somerset Coverage
Liquid Screed Installation — Mark, Somerset
Mark is a Levels village where damp-proofing and subfloor buildup guide the screed spec. We work with that, not against it — sizing the pour, the access and the dry-time to suit.
Mark is a Levels village where damp-proofing and subfloor buildup guide the screed spec. We work with that, not against it — sizing the pour, the access and the dry-time to suit.
We're Mark is a Levels village where damp-proofing and subfloor buildup guide the screed spec. Our coverage runs across TA9, taking in Watchfield-side and out toward , with the M5 (J22, ~6 mi) on hand for materials and pump trucks.
Most of our Mark jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Mark sits Bridgwater (10 mi), and we work the surrounding villages on the same week's diary.
Mark at a glance
County
Somerset
District
Sedgemoor
Postcode
TA9
Nearest city
Bridgwater (10 mi)
Nearest motorway
M5 (J22, ~6 mi)
Primary A-road
B3139
Local industries
Levels agriculture, rural haulage
Common builds
Levels farmhouses, raised new-builds
Typical Mark use cases
- Levels farmhouses — a regular brief in Mark
- Raised new-builds — a regular brief in Mark
- Converted longhouses — a regular brief in Mark
- Packhouse retrofits — a regular brief in Mark
- Levels agriculture — a regular brief in Mark
Liquid screed in Mark — how it works
On larger Mark jobs we mobilise a static mixer; on residential we use ready-mix delivery and a smaller pump. Either way, the finished floor reads the same.
We pour Cemfloor liquid screed at SR1 flatness, pumping straight off the truck into the building. No hand-trowelled bays, no cold joints, ready for trades back on the floor in 48 hours.
Materials and systems we use in Mark
Cemfloor CT-C30-F6
Cement-based liquid screed — robust, low-shrinkage, fast-drying.
Cemfloor Therm
Thermally-optimised for UFH.
PIR insulation + DPM
Build-up tuned to your build regs U-value.
Recent work near Mark
Within easy reach of Mark
Trust points for a Mark brief
- 01Cemfloor-certified, fully insured, CDM-aware
- 02Coordinated with most South West UFH installers
- 03Pre-start meeting standard on every commercial job
- 04Local knowledge — we know the M5 (J22, ~6 mi) access window and B3139 traffic patterns
FAQs from Mark clients
How long does the floor take to dry in Mark?+
Roughly one day per millimetre of depth, ambient conditions allowing. We'll give you specific guidance for your Mark pour.
Do you offer a guarantee?+
As a Cemfloor-certified installer, qualifying installs are backed by a 10-year manufacturer-supported guarantee.
Can you give a fixed-price quote?+
Yes — every Mark quote is a written fixed price against a defined scope. No day-rate surprises.
Do you cover Mark?+
Yes — Mark sits inside our regular 30-mile working radius and we have active diary there most months.
Do you handle UFH coordination?+
Yes — we work with whichever UFH installer is on your Mark project and align dates with their pressure-test schedule.
Do you handle the insulation and DPM?+
Yes if you want a single sub on the floor build-up, or no if your main contractor has it covered. Either works for Mark jobs.
Across Mark, our work runs from single-room renovations to multi-hundred-square-metre commercial pours. The standard doesn't change.
Get a Mark liquid screed quote
Send us the floor area and target dates — fixed-price quote back the same day on most Mark jobs.