Garage Floor Screed · Devon
Garage Floor Screed for Lynton Builds
Lynton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Lynton Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Lynton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Lynton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Lynton sits Barnstaple (18 mi), and we work the surrounding villages on the same week's diary.
EX35 access, routes and logistics
County
Devon
District
North Devon
Postcode
EX35
Nearest city
Barnstaple (18 mi)
Nearest motorway
M5 (J27, ~58 mi)
Primary A-road
A39
Local industries
upland farming, holiday lets
Common builds
granite cottages, farmhouse conversions
Garage Floor Screed in Lynton — how it works
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Built for Lynton rural self-builders and farms
Lynton sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Cemfloor systems for Lynton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Latest jobs across Devon
What backs our Lynton work
Lynton screed questions, answered
Can you do garage conversions as well?+
Yes — full conversion floors with insulation, UFH and screed in one coordinated package across Lynton and the surrounding area.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Lynton diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Lynton site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Lynton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Lynton garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Lynton garage, we form it in the substrate first, then screed at constant thickness.
Lynton-area service radius
From the first site visit to the final laitance sand, our Lynton jobs are run as one fixed-price piece of work — no creeping extras.
Coverage across EX35
From Lynton to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site