Underfloor Heating Screed · Devon
Underfloor Heating Screed — Kentisbeare, Devon
When Kentisbeare self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.
Get a fixed price for Underfloor Heating Screed — Kentisbeare, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
When Kentisbeare self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.
For Kentisbeare UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Most of our Kentisbeare jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kentisbeare sits Cullompton (4 mi), and we work the surrounding villages on the same week's diary.
Kentisbeare projects we see most
- Blackdown-edge cottages — a regular brief in Kentisbeare
- Barn conversions — a regular brief in Kentisbeare
- Rural workshops — a regular brief in Kentisbeare
- Agriculture — a regular brief in Kentisbeare
- Equestrian — a regular brief in Kentisbeare
Right fit for Kentisbeare rural self-builders and farms
Kentisbeare sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Underfloor Heating Screed in Kentisbeare — how it works
We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.
The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.
Specifications suited to Kentisbeare builds
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
How a Kentisbeare pour runs
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Latest jobs across Devon
Nearby villages and towns
What backs our Kentisbeare work
Kentisbeare screed questions, answered
How does this affect my floor coverings in Kentisbeare?+
Once commissioned and the floor moisture content is signed off (CM test, typically below 0.5% for tile), most coverings go down as normal. We hand you a commissioning record.
When can I switch the underfloor heating on in Kentisbeare?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Kentisbeare clients to the schedule.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
Need Underfloor Heating Screed priced for Kentisbeare?
Tell us the square metres and access notes. Most Kentisbeare quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site