Underfloor Heating Screed · Devon
Underfloor Heating Screed in Dunkeswell
Across Dunkeswell we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Get a fixed price for Underfloor Heating Screed in Dunkeswell
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Dunkeswell we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Dunkeswell renovations.
Most of our Dunkeswell jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Dunkeswell sits Honiton (6 mi), and we work the surrounding villages on the same week's diary.
Typical Dunkeswell use cases
- Airfield hangars — a regular brief in Dunkeswell
- New self-builds — a regular brief in Dunkeswell
- Rural industrial units — a regular brief in Dunkeswell
- Dunkeswell Airfield — a regular brief in Dunkeswell
- Skydiving — a regular brief in Dunkeswell
Right fit for Dunkeswell contractors and developers
Dunkeswell skews commercial — trade parks like Dunkeswell Airfield Business Park, contractor-led fit-outs, and developer estates. We price as a sub-contractor on programme, with RAMS and CDM documentation issued ahead of mobilisation.
Underfloor Heating Screed in Dunkeswell — how it works
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Dunkeswell renovations.
We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.
Specifications suited to Dunkeswell builds
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
How a Dunkeswell pour runs
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Floors poured around Dunkeswell
Within easy reach of Dunkeswell
Proof from the Devon workload
Hundreds of square metres poured around Dunkeswell in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Common Dunkeswell build questions
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
When can I switch the underfloor heating on in Dunkeswell?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Dunkeswell clients to the schedule.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
How does this affect my floor coverings in Dunkeswell?+
Once commissioned and the floor moisture content is signed off (CM test, typically below 0.5% for tile), most coverings go down as normal. We hand you a commissioning record.
Ready for a laser-flat floor in Dunkeswell?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site