Garage Floor Screed · Devon
Garage Floor Screed — Kentisbeare, Devon
Whether you're future-proofing a Kentisbeare garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed — Kentisbeare, Devon
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Kentisbeare garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Kentisbeare garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Kentisbeare jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Kentisbeare sits Cullompton (4 mi), and we work the surrounding villages on the same week's diary.
Where liquid screed earns its keep in Kentisbeare
- Blackdown-edge cottages — a regular brief in Kentisbeare
- Barn conversions — a regular brief in Kentisbeare
- Rural workshops — a regular brief in Kentisbeare
- Agriculture — a regular brief in Kentisbeare
- Equestrian — a regular brief in Kentisbeare
Who this is for in Kentisbeare
Kentisbeare sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Garage Floor Screed in Kentisbeare — how it works
A typical Kentisbeare single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Materials and systems we use in Kentisbeare
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What to expect on pour day in Kentisbeare
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Floors poured around Kentisbeare
Adjacent areas — usually same-week diary
Proof from the Devon workload
Common Kentisbeare build questions
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Kentisbeare garage, we form it in the substrate first, then screed at constant thickness.
Can liquid screed take an EV charger and a car's weight in Kentisbeare?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Kentisbeare garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Kentisbeare diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Kentisbeare site clean and the floor protected with sheeting.
Can you do this on a single-garage budget?+
Yes — single-garage jobs are a regular run for us across Kentisbeare. We'll give you a flat quote with no surprises.
Need Garage Floor Screed priced for Kentisbeare?
Tell us the square metres and access notes. Most Kentisbeare quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site