Renovation Screed · Devon

Renovation Screed — Countess Wear, Devon

an estuary-side Exeter pocket between Sowton offices and Topsham — which is why our renovation screed in Countess Wear is engineered for tight constraints, not new-build freedom.

Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Renovation Screed — Countess Wear, Devon

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

an estuary-side Exeter pocket between Sowton offices and Topsham — which is why our renovation screed in Countess Wear is engineered for tight constraints, not new-build freedom.

Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.

Most of our Countess Wear jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Countess Wear sits Exeter (3 mi), and we work the surrounding villages on the same week's diary.

Typical Countess Wear use cases

  • Riverside semis — a regular brief in Countess Wear
  • Sowton-edge offices — a regular brief in Countess Wear
  • New flats — a regular brief in Countess Wear
  • Sowton offices — a regular brief in Countess Wear
  • Met Office support — a regular brief in Countess Wear

Built for Countess Wear homeowners and contractors alike

Countess Wear runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.

Renovation Screed in Countess Wear — how it works

Most Countess Wear renovations want UFH retro-fit. Liquid screed lets you wrap pipes in a thin build-up the original construction never planned for.

Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.

Cemfloor systems for Countess Wear

Cemfloor CT-C30-F6 (thin-section)

Where minimum depth matters more than maximum mass.

Cemfloor Therm

Retro-fit UFH in renovation builds.

Acoustic underlay

Critical for {town} flat conversions where impact noise is a concern.

Self-levelling overlay primer

For bonded thin-section pours over existing slabs.

Step-by-step for a Countess Wear job

  1. 1

    Site visit — inspect substrate, threshold heights, structural movement

  2. 2

    Strip and prep, or prime existing slab

  3. 3

    Insulation, UFH coordination and edge isolation

  4. 4

    Pour, level and protect

  5. 5

    Floor coverings once dry and signed off

Floors poured around Countess Wear

Renovation screed for a barn conversion near Honiton
Renovation screed for a barn conversion near Honiton
Estuary-side residential retrofit in Topsham
Estuary-side residential retrofit in Topsham
Open-plan ground floor poured for a new-build in Exeter
Open-plan ground floor poured for a new-build in Exeter

Proof from the Devon workload

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J30, ~2 mi) access window and A379 traffic patterns

Common Countess Wear build questions

Is liquid screed safe over a heritage property in Countess Wear?+

With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.

Can you screed over my existing concrete floor in Countess Wear?+

Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Countess Wear substrate at the site visit and price accordingly.

Will it work with my new UFH retro-fit?+

Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.

Can you do a single room rather than the whole house?+

Yes — single-room renovation pours are a regular run for us across Countess Wear, with movement joints at the doorway to isolate from neighbouring rooms.

Will the screed stick to my old skirtings?+

We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.

Can you match the new floor level to the existing rooms?+

Yes — we set datums off your existing FFL and finish the new slab to match, with allowance for floor coverings.

Book your Countess Wear pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp