Traditional Sand & Cement Screed · Devon
Colaton Raleigh Traditional Sand & Cement Screed Specialists
For Colaton Raleigh jobs where gypsum-based screed is ruled out, wet rooms, balconies, timber-sensitive junctions, we lay a semi-dry sand and cement mix, bay by bay, finished to SR2 with a hand float or power trowel.
Need a hand-trowelled screed in Colaton Raleigh?
Tell us the depth, falls and access, and we'll come back with a fixed price for your Colaton Raleigh sand and cement floor.
Get a Colaton Raleigh quote07791 510849 WhatsApp usGet a fixed price for Colaton Raleigh Traditional Sand & Cement Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
For Colaton Raleigh jobs where gypsum-based screed is ruled out, wet rooms, balconies, timber-sensitive junctions, we lay a semi-dry sand and cement mix, bay by bay, finished to SR2 with a hand float or power trowel.
For Colaton Raleigh wet rooms, balconies and any area with sustained water contact, sand and cement is usually the only sensible screed choice, since gypsum-based liquid screeds are not designed to tolerate standing water.
Most of our Colaton Raleigh jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Colaton Raleigh sits Exeter (12 mi), and we work the surrounding villages on the same week's diary.
Built for Colaton Raleigh rural self-builders and farms
Colaton Raleigh sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Local facts that shape every Colaton Raleigh pour
County
Devon
District
East Devon
Postcode
EX10
Nearest city
Exeter (12 mi)
Nearest motorway
M5 (J30, ~10 mi)
Primary A-road
B3178
Local industries
agriculture, commuter
Common builds
cob cottages, small new estates
Traditional Sand & Cement Screed in Colaton Raleigh — how it works
We mix a semi-dry sand and cement screed on site or bring it in via a screed pump, lay it to string lines or laser-set pins in bays, then compact and trowel it to a flat, dense surface. It is slower than a liquid pour, roughly a day of drying time per millimetre of depth once you get past the first 50mm, but it tolerates a much wider range of site conditions.
Unlike a self-levelling liquid screed, sand and cement is placed and compacted by hand, so we control the fall towards a drain, form an upstand at a threshold, or feather it into an existing floor level in a way a pumped pour cannot.
Step-by-step for a Colaton Raleigh job
- 1
Site visit to assess substrate, falls, depth and access, since sand and cement can be barrowed where a pump truck cannot reach
- 2
Substrate prep, priming or DPM, and setting out of bay lines and laser levels
- 3
Mix and place the screed in bays, compacting as we go to remove voids
- 4
Hand float or power trowel to a flat, dense SR2 finish
- 5
Protect and allow to cure, typically a day per millimetre of depth after the first 50mm
- 6
Follow-up inspection before floor coverings or tiling begin
Latest jobs across Devon
Cemfloor systems for Colaton Raleigh
Sand and cement (typically 4:1 or 5:1 mix)
Semi-dry, hand-compacted mix ratio adjusted to depth and loading.
SBR bonding agent
Slurry-brushed onto the substrate for bonded screeds under 40mm.
Polypropylene fibre reinforcement
Added to reduce shrinkage cracking on larger bays.
DPM and separating membrane
For unbonded or floating screeds over insulation.
Falls formed to drain outlets
Built into the screed thickness for wet rooms and balconies.
Edge and movement joints
Set at bay lines, doorways and around columns.
Other areas we cover near Colaton Raleigh
Colaton Raleigh screed questions, answered
Is sand and cement screed suitable for a wet room in Colaton Raleigh?+
Yes, it is the standard choice for wet rooms, shower rooms and balconies because it tolerates sustained water contact in a way gypsum-based liquid screeds do not.
How is sand and cement screed different from liquid screed in Colaton Raleigh?+
Sand and cement is a semi-dry mix, hand-laid and trowelled in bays, whereas liquid screed is pumped and self-levels. Sand and cement suits deep fills, external areas and wet rooms; liquid screed suits large flat internal floors that need to dry quickly.
What SR rating do you achieve on a trowelled screed?+
We finish sand and cement to SR2, within 3mm under a 2m straight edge, which is suitable for most tiled finishes. If you need SR1 flatness for large-format tile or resin, liquid screed is usually the better route.
Will the screed crack?+
Bay joints and fibre reinforcement control shrinkage cracking. We set bay sizes and joint positions at doorways and depth changes to minimise the risk on any Colaton Raleigh job.
How long does a sand and cement screed take to dry in Colaton Raleigh?+
Roughly a day per millimetre of depth once past the first 50mm, so a 65mm floor is typically ready for coverings in around six to eight weeks, depending on ventilation and site conditions.
Do you use a screed pump for sand and cement in Colaton Raleigh?+
On larger jobs, yes, a screed pump can deliver the semi-dry mix into the building, which speeds up placement while keeping the hand-trowelled finish.
What backs our Colaton Raleigh work
Hundreds of square metres poured around Colaton Raleigh in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Need a hand-trowelled screed in Colaton Raleigh?
Tell us the depth, falls and access, and we'll come back with a fixed price for your Colaton Raleigh sand and cement floor.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site