Renovation Screed · Dorset
Renovation Screed Poured to SR1 in Yetminster
Across Yetminster we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Get a fixed price for Renovation Screed Poured to SR1 in Yetminster
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Yetminster we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Old buildings move differently. We talk through movement joints at thresholds and against existing walls, so the new floor doesn't fight the old structure.
Most of our Yetminster jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Yetminster sits Yeovil (7 mi), and we work the surrounding villages on the same week's diary.
What we plan around in Yetminster
County
Dorset
District
Dorset
Postcode
DT9
Nearest city
Yeovil (7 mi)
Nearest motorway
M5 (J25, ~32 mi)
Primary A-road
B3148
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Renovation Screed in Yetminster — how it works
Most Yetminster renovations want UFH retro-fit. Liquid screed lets you wrap pipes in a thin build-up the original construction never planned for.
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Built for Yetminster rural self-builders and farms
Yetminster sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Cemfloor systems for Yetminster
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
Floors poured around Yetminster
Proof from the Dorset workload
Common Yetminster build questions
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Yetminster, with movement joints at the doorway to isolate from neighbouring rooms.
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Can you screed over my existing concrete floor in Yetminster?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Yetminster substrate at the site visit and price accordingly.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
Is liquid screed safe over a heritage property in Yetminster?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
What's the disruption like?+
Pump day is loud for a couple of hours. After that, the room is cordoned for 24-48 hours while the floor cures. We work clean and protect adjacent finishes.
Adjacent areas — usually same-week diary
Pin down a date for your Yetminster pour, and we'll handle the rest — pump, mix, lay, level, protect, hand over.
Need Renovation Screed priced for Yetminster?
Tell us the square metres and access notes. Most Yetminster quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site