Garage Floor Screed · Devon
West Hill Garage Floor Screed Specialists
West Hill garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for West Hill Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
West Hill garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our West Hill jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. West Hill sits Exeter (10 mi), and we work the surrounding villages on the same week's diary.
Typical West Hill use cases
- Executive homes — a regular brief in West Hill
- Premium new-builds — a regular brief in West Hill
- Wooded plots — a regular brief in West Hill
- Premium residential — a regular brief in West Hill
- Commuter — a regular brief in West Hill
Right fit for West Hill homeowners and self-builders
West Hill is residential-heavy, with renovation, extension and self-build briefs dominating the diary. We work directly with homeowners and their builders, with a single point of contact for the screed package.
Garage Floor Screed in West Hill — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For West Hill garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Specifications suited to West Hill builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
How a West Hill pour runs
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Recent work near West Hill
Within easy reach of West Hill
Trust points for a West Hill brief
FAQs from West Hill clients
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the West Hill site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in West Hill?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your West Hill garage usage.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your West Hill diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your West Hill garage, we form it in the substrate first, then screed at constant thickness.
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the West Hill site visit.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Coverage across EX11
From West Hill to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site