Garage Floor Screed · Devon
Aylesbeare Garage Floor Screed Specialists
Aylesbeare garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Aylesbeare Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Aylesbeare garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Aylesbeare jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Aylesbeare sits Exeter (8 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Aylesbeare — how it works
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
For Aylesbeare garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Local facts that shape every Aylesbeare pour
County
Devon
District
East Devon
Postcode
EX5
Nearest city
Exeter (8 mi)
Nearest motorway
M5 (J30, ~6 mi)
Primary A-road
A3052
Local industries
commuter, agriculture
Common builds
heath-edge cottages, small new self-builds
Common briefs across Aylesbeare
- Heath-edge cottages — a regular brief in Aylesbeare
- Small new self-builds — a regular brief in Aylesbeare
- Farm outbuildings — a regular brief in Aylesbeare
- Commuter — a regular brief in Aylesbeare
- Agriculture — a regular brief in Aylesbeare
Recent work near Aylesbeare
How a Aylesbeare pour runs
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Trust points for a Aylesbeare brief
Other areas we cover near Aylesbeare
Specifications suited to Aylesbeare builds
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
FAQs from Aylesbeare clients
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Aylesbeare diary.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Aylesbeare site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Aylesbeare?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Aylesbeare garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Aylesbeare garage, we form it in the substrate first, then screed at constant thickness.
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Aylesbeare site visit.
Coverage across EX5
From Aylesbeare to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site