Liquid Screed · Dorset

Sherborne Liquid Screed Specialists

Sherborne builders pick liquid screed because it pours fast, dries faster and leaves a floor that tile and engineered timber actually want to bond to.

Talk to a Sherborne-area screeder

We'll walk the build with you over a phone call — no hard sell, just honest numbers.

Call 07791 51084907791 510849 WhatsApp us
Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Sherborne Liquid Screed Specialists

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Sherborne builders pick liquid screed because it pours fast, dries faster and leaves a floor that tile and engineered timber actually want to bond to.

Unlike a traditional sand-and-cement screed, you'll be back on the floor in 24-48 hours rather than a week, and the surface is flat enough to lay LVT or large-format tile without further latex.

Most of our Sherborne jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Sherborne sits Yeovil (5 mi), and we work the surrounding villages on the same week's diary.

Right fit for Sherborne homeowners and contractors alike

Sherborne runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.

What we plan around in Sherborne

County

Dorset

District

Dorset

Postcode

DT9

Nearest city

Yeovil (5 mi)

Nearest motorway

M5 (J25, ~30 mi)

Primary A-road

A30 / A352

Local industries

independent retail, market-town hospitality

Common builds

Georgian townhouses, stone cottages

Liquid Screed in Sherborne — how it works

Liquid screed bonds into a single monolithic layer with no bays, no day joints and no need for steel mesh — it's poured around any UFH pipework you've already pressure-tested.

Unlike a traditional sand-and-cement screed, you'll be back on the floor in 24-48 hours rather than a week, and the surface is flat enough to lay LVT or large-format tile without further latex.

How a Sherborne pour runs

  1. 1

    Site visit and written quote — confirm depths, area, access, build-up

  2. 2

    We prep edge insulation, polythene DPM and any UFH coordination

  3. 3

    Pump day: ready-mixed screed pumped, levelled and spike-rolled in one pour

  4. 4

    Cover and protect for 24-48 hours

  5. 5

    Light foot traffic from day 2; floor coverings once moisture content is signed off

Sherborne-area projects

Open-plan ground floor poured for a new-build in Exeter
Open-plan ground floor poured for a new-build in Exeter
Estuary-side residential retrofit in Topsham
Estuary-side residential retrofit in Topsham
Fresh liquid screed pour in an Exeter extension
Fresh liquid screed pour in an Exeter extension

Specifications suited to Sherborne builds

Cemfloor CT-C30-F6

Cement-based liquid screed — fast-drying, low shrinkage, suitable for most floor coverings.

Cemfloor Therm

Optimised for underfloor heating with high thermal conductivity.

Acoustic and thermal insulation underlay

PIR, EPS or acoustic mat depending on the build-up.

Edge isolation strip

10mm closed-cell foam to allow thermal movement.

What people in Sherborne usually ask

Does liquid screed crack like sand-and-cement?+

Calcium-sulphate and modern cement-based liquid screeds have very low drying shrinkage. With proper edge isolation and joints at doorways, cracking is rare.

Can you pour in cold weather?+

Yes, with the right ambient control. We won't pour below 5°C and we'll discuss frost protection for any Sherborne pour in the colder months.

Can liquid screed go over an existing concrete slab?+

Yes — typically unbonded over a DPM and slip membrane, from 35mm. We'll assess the substrate at the Sherborne site visit.

How quickly can I walk on a liquid screed floor in Sherborne?+

Light foot traffic from 24-48 hours after the pour. Heavy loading, follow-on trades and final floor coverings depend on depth and ambient conditions — we leave you with clear drying guidance for your specific Sherborne job.

Do I need to be on site for the pour in Sherborne?+

Not necessarily — we usually agree access with the main contractor or self-builder and run the pour with our own team. We'll confirm the Sherborne access route, pump position and waste route before the day.

Do you offer a guarantee?+

Yes — as a Cemfloor-certified installer, qualifying jobs are backed by a 10-year manufacturer-supported guarantee.

Why Sherborne clients pick us

Hundreds of square metres poured around Sherborne in the last 12 months

Single-team continuity — same crew, same standards, every job

Written fixed-price quotes — no day-rate creep

Moisture-test handover record so flooring contractors take the slab on without dispute

Talk to a Sherborne-area screeder

We'll walk the build with you over a phone call — no hard sell, just honest numbers.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp