Liquid Screed · Devon
Plymtree Liquid Screed Specialists
Plymtree builders pick liquid screed because it pours fast, dries faster and leaves a floor that tile and engineered timber actually want to bond to.
Get a fixed price for Plymtree Liquid Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Plymtree builders pick liquid screed because it pours fast, dries faster and leaves a floor that tile and engineered timber actually want to bond to.
Unlike a traditional sand-and-cement screed, you'll be back on the floor in 24-48 hours rather than a week, and the surface is flat enough to lay LVT or large-format tile without further latex.
Most of our Plymtree jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Plymtree sits Cullompton (5 mi), and we work the surrounding villages on the same week's diary.
EX15 access, routes and logistics
County
Devon
District
East Devon
Postcode
EX15
Nearest city
Cullompton (5 mi)
Nearest motorway
M5 (J28, ~6 mi)
Primary A-road
B3176
Local industries
cider, agriculture
Common builds
listed cob cottages, small self-builds
What Plymtree builds usually need
- Listed cob cottages — a regular brief in Plymtree
- Small self-builds — a regular brief in Plymtree
- Orchard outbuildings — a regular brief in Plymtree
- Cider — a regular brief in Plymtree
- Agriculture — a regular brief in Plymtree
Liquid Screed in Plymtree — how it works
We pump Cemfloor calcium-sulphate screed from a static mixer into your building, level it with a dappling bar, and walk away with a floor that's typically dry enough for floor coverings in roughly one day per millimetre of depth.
The screed arrives ready-mixed on a truck, gets pumped through a hose to wherever it's needed in the building, and self-levels to within a couple of millimetres across the room. We spike-roll it to release air, then leave it.
Specifications suited to Plymtree builds
Cemfloor CT-C30-F6
Cement-based liquid screed — fast-drying, low shrinkage, suitable for most floor coverings.
Cemfloor Therm
Optimised for underfloor heating with high thermal conductivity.
Acoustic and thermal insulation underlay
PIR, EPS or acoustic mat depending on the build-up.
Edge isolation strip
10mm closed-cell foam to allow thermal movement.
Latest jobs across Devon
Plymtree-area service radius
What backs our Plymtree work
Hundreds of square metres poured around Plymtree in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Plymtree screed questions, answered
Can other trades work above while you pour?+
We prefer the floor area cleared on pour day, but trades can work in unrelated areas. We'll set out a sensible plan with your site manager.
How quickly can I walk on a liquid screed floor in Plymtree?+
Light foot traffic from 24-48 hours after the pour. Heavy loading, follow-on trades and final floor coverings depend on depth and ambient conditions — we leave you with clear drying guidance for your specific Plymtree job.
Can liquid screed go over an existing concrete slab?+
Yes — typically unbonded over a DPM and slip membrane, from 35mm. We'll assess the substrate at the Plymtree site visit.
Can you pour in cold weather?+
Yes, with the right ambient control. We won't pour below 5°C and we'll discuss frost protection for any Plymtree pour in the colder months.
Does liquid screed crack like sand-and-cement?+
Calcium-sulphate and modern cement-based liquid screeds have very low drying shrinkage. With proper edge isolation and joints at doorways, cracking is rare.
Do I need to be on site for the pour in Plymtree?+
Not necessarily — we usually agree access with the main contractor or self-builder and run the pour with our own team. We'll confirm the Plymtree access route, pump position and waste route before the day.
Plymtree jobs reward proper site prep. We'll spec the build-up with your UFH installer, agree the pour window, and leave you a floor your tilers will thank us for.
Talk to a Plymtree-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site