New Build Screeding · Somerset
New Build Screeding — Pawlett, Somerset
Developers building across Pawlett need a screed contractor who understands plot handover dates, not just square metreage. We plan pours around your build programme from day one.
Get a fixed price for New Build Screeding — Pawlett, Somerset
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Developers building across Pawlett need a screed contractor who understands plot handover dates, not just square metreage. We plan pours around your build programme from day one.
Output on a typical Pawlett plot run is several units per day depending on floor area and pump access, with our crew moving between plots as each pour cures under protection.
Most of our Pawlett jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Pawlett sits Bridgwater (4 mi), and we work the surrounding villages on the same week's diary.
Typical Pawlett use cases
- Levels farmhouses — a regular brief in Pawlett
- Raised new-builds — a regular brief in Pawlett
- Converted longhouses — a regular brief in Pawlett
- Packhouse retrofits — a regular brief in Pawlett
- Levels agriculture — a regular brief in Pawlett
Who this is for in Pawlett
Pawlett sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
New Build Screeding in Pawlett — how it works
We work from the site programme, not just the drawings, agreeing pump positions, plot order and waste routes with the site manager before mobilising, so a Pawlett development moves through screed without a gap in the build sequence.
Each plot is pumped, levelled and spike-rolled as its own visit, but priced and scheduled as part of one development-wide package, so you get a single point of contact across the whole Pawlett site rather than a new quote for every unit.
Materials and systems we use in Pawlett
Cemfloor CT-C30-F6
Standard cement-based liquid screed for repeat plot pours.
Cemfloor Therm
Where the development spec includes underfloor heating as standard.
Insulation to development U-value spec
PIR or EPS specified once and repeated across every plot.
Edge isolation strip
Fitted to a consistent standard detail across the whole site.
DPM to NHBC/warranty provider standard
Matched to the site's chosen warranty provider requirements.
Plot-by-plot moisture test kit
CM testing to hand over each unit with its own written record.
What to expect on pour day in Pawlett
- 1
Pre-start meeting with the developer or main contractor to agree plot sequence, pump access and programme dates
- 2
Confirm build-up once with the architect and M&E consultant, then apply it consistently across every plot
- 3
Mobilise crew and pump to move plot to plot, pumping and levelling each unit in turn
- 4
Protect each plot for 24-48 hours while the crew moves on to the next
- 5
Moisture testing and a written handover record issued per plot
- 6
Snagging and any remedial work coordinated directly with the site manager before final trades move in
Latest jobs across Somerset
Within easy reach of Pawlett
What backs our Pawlett work
Pawlett screed questions, answered
Do you handle underfloor heating across a whole Pawlett development?+
Yes, where UFH is part of the development spec we coordinate pressure-testing and pour sequencing with the M&E contractor plot by plot.
Do you provide RAMS for a new build site in Pawlett?+
Yes, full RAMS, COSHH documentation and insurance details are issued ahead of mobilisation, formatted for your CDM principal contractor.
How do you hand over moisture readings on a multi-plot job?+
Each plot gets its own CM-test record and written sign-off, so your flooring contractor or NHBC inspector has a clear document per unit, not one blanket certificate for the site.
How many plots can you screed per day on a Pawlett development?+
It depends on floor area and pump access, but a typical crew moves through several plots a day on a standard housing scheme, with output agreed against your programme at the pre-start meeting.
Can you keep the same build-up across every plot?+
Yes, we agree the specification once with your architect or M&E consultant and repeat it consistently, so plot 1 and the last plot on the Pawlett site come out to the same depth and finish.
Do you price the whole Pawlett site or plot by plot?+
Both, most developers prefer a single development-wide package with a per-plot rate, so instructing extra plots later is straightforward and there's no re-quoting for every unit.
Keep your Pawlett plots on programme
Screed is often the trade holding up the schedule. Let's agree pump access and plot sequencing before it becomes a bottleneck.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site