Underfloor Heating Screed · Devon

Underfloor Heating Screed — Modbury, Devon

Liquid UFH screed in Modbury replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.

Book your Modbury pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Reserve a date07791 510849 WhatsApp us
Same-day quotes Fixed pricing Fully insured crews 5★ Google & Yell reviews 07791 510849
Free quote · No obligation

Get a fixed price for Underfloor Heating Screed — Modbury, Devon

30 seconds. We'll come back same-day with a fixed price and next available date.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed

Liquid UFH screed in Modbury replaces the air gaps and voids that bog standard sand-and-cement leaves around pipes, lifting system response and cutting running costs.

We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.

Most of our Modbury jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Modbury sits Plymouth (12 mi), and we work the surrounding villages on the same week's diary.

Built for Modbury rural self-builders and farms

Modbury sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.

PL21 access, routes and logistics

County

Devon

District

South Hams

Postcode

PL21

Nearest city

Plymouth (12 mi)

Nearest motorway

M5 (J31, ~37 mi)

Primary A-road

A379

Local industries

independent retail, agriculture

Common builds

Georgian high-street, small new estates

Underfloor Heating Screed in Modbury — how it works

The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.

For Modbury UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.

Step-by-step for a Modbury job

  1. 1

    UFH installer fits manifold, pipes and pressure-tests to 6 bar

  2. 2

    We confirm edge insulation, DPM and pipe coverage depth

  3. 3

    Pump and level the screed with pipes still under pressure

  4. 4

    Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec

  5. 5

    Floor coverings once moisture is signed off and commissioning is complete

Recent work near Modbury

UFH screed laid over a coastal apartment in Exmouth
UFH screed laid over a coastal apartment in Exmouth
Self-build UFH pour near Tiverton
Self-build UFH pour near Tiverton
Commercial pour at Heathfield, Newton Abbot
Commercial pour at Heathfield, Newton Abbot

Cemfloor systems for Modbury

Cemfloor Therm

Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.

PIR/Phenolic insulation board

70-150mm typical depending on build regs U-value target.

Edge insulation strip

Critical around UFH zones to allow thermal expansion.

Pressure-testing kit

Pipes held at 6 bar through the pour to flag any damage immediately.

FAQs from Modbury clients

When can I switch the underfloor heating on in Modbury?+

On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Modbury clients to the schedule.

Does liquid UFH screed improve EPC ratings?+

Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.

What depth of screed over UFH pipes do you recommend?+

Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.

Will the screed crack as the UFH heats up?+

Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.

What if a pipe leaks during the pour?+

Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.

Do you fit the UFH pipes yourself?+

We work alongside your chosen UFH installer rather than fitting pipes ourselves — most Modbury jobs come with a heating sub-contractor already lined up, and we coordinate dates with them.

Trust points for a Modbury brief

  1. 01Cemfloor-certified, fully insured, CDM-aware
  2. 02Coordinated with most South West UFH installers
  3. 03Pre-start meeting standard on every commercial job
  4. 04Local knowledge — we know the M5 (J31, ~37 mi) access window and A379 traffic patterns

Book your Modbury pour

Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.

Free quote · No obligation

Ready to get a price?

Tell us the rough size and location — we'll come back with a fixed quote today.

Call mobile

Or call our landline on 01392 237700

Same-day reply
Fully insured
5★ reviewed
Mobile Landline WhatsApp