Garage Floor Screed · Somerset
Garage Floor Screed for Milverton Builds
Milverton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Milverton Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Milverton garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Milverton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Milverton sits Taunton (8 mi), and we work the surrounding villages on the same week's diary.
Garage Floor Screed in Milverton — how it works
For Milverton garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Milverton single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Local facts that shape every Milverton pour
County
Somerset
District
Somerset West
Postcode
TA4
Nearest city
Taunton (8 mi)
Nearest motorway
M5 (J26, ~9 mi)
Primary A-road
B3187
Local industries
independent retail, agriculture
Common builds
Georgian high-street, stone cottages
Common briefs across Milverton
- Georgian high-street — a regular brief in Milverton
- Stone cottages — a regular brief in Milverton
- Small self-builds — a regular brief in Milverton
- Independent retail — a regular brief in Milverton
- Agriculture — a regular brief in Milverton
Milverton-area projects
Step-by-step for a Milverton job
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Why Milverton clients pick us
Other areas we cover near Milverton
Cemfloor systems for Milverton
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What people in Milverton usually ask
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Milverton site visit.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Milverton diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Milverton garage, we form it in the substrate first, then screed at constant thickness.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Milverton site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Milverton?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Milverton garage usage.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Talk to a Milverton-area screeder
We'll walk the build with you over a phone call — no hard sell, just honest numbers.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site