
Garage Floor Screed · Somerset
Norton Fitzwarren Garage Floor Screed Specialists
Norton Fitzwarren garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Norton Fitzwarren Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Norton Fitzwarren garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Norton Fitzwarren jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Norton Fitzwarren sits Taunton (2 mi), and we work the surrounding villages on the same week's diary.
Local facts that shape every Norton Fitzwarren pour
County
Somerset
District
Somerset West and Taunton
Postcode
TA2
Nearest city
Taunton (2 mi)
Nearest motorway
M5 (J25, ~4 mi)
Primary A-road
A358
Local industries
local retail, school and community builds
Common builds
1930s semis, estate new-builds
Common briefs across Norton Fitzwarren
- 1930s semis — a regular brief in Norton Fitzwarren
- Estate new-builds — a regular brief in Norton Fitzwarren
- Kitchen-diner extensions — a regular brief in Norton Fitzwarren
- Garden-room outbuildings — a regular brief in Norton Fitzwarren
- Local retail — a regular brief in Norton Fitzwarren
Garage Floor Screed in Norton Fitzwarren — how it works
A typical Norton Fitzwarren single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Materials and systems we use in Norton Fitzwarren
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Norton Fitzwarren



Other areas we cover near Norton Fitzwarren
Proof from the Somerset workload
Common Norton Fitzwarren build questions
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Norton Fitzwarren diary.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Norton Fitzwarren garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Can liquid screed take an EV charger and a car's weight in Norton Fitzwarren?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Norton Fitzwarren garage usage.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Norton Fitzwarren site clean and the floor protected with sheeting.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Pin down a date for your Norton Fitzwarren pour, and we'll handle the rest — pump, mix, lay, level, protect, hand over.
Coverage across TA2
From Norton Fitzwarren to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site
