Garage Floor Screed · Devon
Garage Floor Screed for Ivybridge Builds
Ivybridge garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Coverage across PL21
From Ivybridge to the surrounding villages, we keep the radius tight so logistics stay simple.
See coverage07791 510849 WhatsApp usGet a fixed price for Garage Floor Screed for Ivybridge Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Ivybridge garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Ivybridge jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Ivybridge sits Plymouth (10 mi), and we work the surrounding villages on the same week's diary.
Who this is for in Ivybridge
Ivybridge runs a healthy mix of residential renovation and small-to-medium commercial fit-out. We price both, and run both with the same fixed-price approach.
Local facts that shape every Ivybridge pour
County
Devon
District
South Hams
Postcode
PL21
Nearest city
Plymouth (10 mi)
Nearest motorway
M5 (J31, ~33 mi)
Primary A-road
A38
Local industries
commuter, distribution
Common builds
large new estates, paper-mill heritage
Garage Floor Screed in Ivybridge — how it works
A typical Ivybridge single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
What to expect on pour day in Ivybridge
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Floors poured around Ivybridge
Materials and systems we use in Ivybridge
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Other areas we cover near Ivybridge
Common Ivybridge build questions
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Ivybridge diary.
Can liquid screed take an EV charger and a car's weight in Ivybridge?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Ivybridge garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Ivybridge garage, we form it in the substrate first, then screed at constant thickness.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Ivybridge site clean and the floor protected with sheeting.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
Proof from the Devon workload
Coverage across PL21
From Ivybridge to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site