Underfloor Heating Screed · Somerset
Underfloor Heating Screed in Ilton
Across Ilton we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Coverage across TA19
From Ilton to the surrounding villages, we keep the radius tight so logistics stay simple.
See coverage07791 510849 WhatsApp usGet a fixed price for Underfloor Heating Screed in Ilton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Ilton we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Ilton renovations.
Most of our Ilton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Ilton sits Taunton (10 mi), and we work the surrounding villages on the same week's diary.
Right fit for Ilton rural self-builders and farms
Ilton sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Local facts that shape every Ilton pour
County
Somerset
District
Somerset
Postcode
TA19
Nearest city
Taunton (10 mi)
Nearest motorway
M5 (J25, ~11 mi)
Primary A-road
B3168
Local industries
agriculture, equestrian yards
Common builds
stone farmhouses, barn conversions
Underfloor Heating Screed in Ilton — how it works
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Ilton renovations.
We pour Cemfloor Therm liquid screed over your UFH pipes at 50mm above pipe (typically 65-75mm total over insulation), giving full pipe encapsulation, fast thermal response and a finished surface flat to SR1.
How a Ilton pour runs
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Floors poured around Ilton
Specifications suited to Ilton builds
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
Other areas we cover near Ilton
Common Ilton build questions
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
When can I switch the underfloor heating on in Ilton?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Ilton clients to the schedule.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
Can you pour over a heat-pump system in Ilton?+
Yes — and we'd argue you should. Heat pumps run at lower flow temperatures than gas, so the screed's thermal conductivity matters more, not less.
Proof from the Somerset workload
Hundreds of square metres poured around Ilton in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Coverage across TA19
From Ilton to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site