Underfloor Heating Screed · Somerset
Underfloor Heating Screed Poured to SR1 in Stoke St Gregory
When Stoke St Gregory self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.
Cemfloor-certified work near Stoke St Gregory
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Start a quote07791 510849 WhatsApp usGet a fixed price for Underfloor Heating Screed Poured to SR1 in Stoke St Gregory
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
When Stoke St Gregory self-builders specify UFH, the screed is what makes the system efficient. We pump Cemfloor Therm directly around your pressure-tested pipework for full encapsulation.
For Stoke St Gregory UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Most of our Stoke St Gregory jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Stoke St Gregory sits Taunton (7 mi), and we work the surrounding villages on the same week's diary.
Built for Stoke St Gregory rural self-builders and farms
Stoke St Gregory sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
TA3 access, routes and logistics
County
Somerset
District
Somerset West and Taunton
Postcode
TA3
Nearest city
Taunton (7 mi)
Nearest motorway
M5 (J25, ~8 mi)
Primary A-road
B3153
Local industries
Levels agriculture, rural haulage
Common builds
Levels farmhouses, raised new-builds
Underfloor Heating Screed in Stoke St Gregory — how it works
The screed self-levels around every loop, eliminating the voids you get under hand-laid traditional screed. That means the floor responds faster when the heating calls for it, and stores less wasted heat.
For Stoke St Gregory UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Step-by-step for a Stoke St Gregory job
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Recent work near Stoke St Gregory
Cemfloor systems for Stoke St Gregory
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
Stoke St Gregory-area service radius
FAQs from Stoke St Gregory clients
When can I switch the underfloor heating on in Stoke St Gregory?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Stoke St Gregory clients to the schedule.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Can you screed over wet UFH and electric UFH?+
Yes — Cemfloor Therm encapsulates both. Electric mat systems usually take a thinner cover; wet pipes need the 50mm minimum.
Trust points for a Stoke St Gregory brief
Cemfloor-certified work near Stoke St Gregory
Manufacturer-backed install, ten-year guarantee, fully insured. Get a written quote.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site