Garage Floor Screed · Somerset
Garage Floor Screed for Crewkerne Builds
Crewkerne garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Garage Floor Screed for Crewkerne Builds
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Crewkerne garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Crewkerne jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Crewkerne sits Taunton (18 mi), and we work the surrounding villages on the same week's diary.
Local facts that shape every Crewkerne pour
County
Somerset
District
South Somerset
Postcode
TA18
Nearest city
Taunton (18 mi)
Nearest motorway
M5 (J25, ~20 mi)
Primary A-road
A30 / A356
Local industries
textile heritage, distribution
Common builds
hamstone Georgian terraces, station-side new estates
Common briefs across Crewkerne
- Hamstone Georgian terraces — a regular brief in Crewkerne
- Station-side new estates — a regular brief in Crewkerne
- Industrial units — a regular brief in Crewkerne
- Textile heritage — a regular brief in Crewkerne
- Distribution — a regular brief in Crewkerne
Garage Floor Screed in Crewkerne — how it works
For Crewkerne garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
A typical Crewkerne single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
Cemfloor systems for Crewkerne
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Crewkerne-area projects
Other areas we cover near Crewkerne
Why Crewkerne clients pick us
What people in Crewkerne usually ask
Do you need to remove my existing garage floor?+
Usually no — if the existing slab is sound we bond directly to it from 30mm. We'll inspect first at the Crewkerne site visit.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Crewkerne site clean and the floor protected with sheeting.
Can liquid screed take an EV charger and a car's weight in Crewkerne?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Crewkerne garage usage.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Crewkerne garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Crewkerne diary.
Pin down a date for your Crewkerne pour, and we'll handle the rest — pump, mix, lay, level, protect, hand over.
Coverage across TA18
From Crewkerne to the surrounding villages, we keep the radius tight so logistics stay simple.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site