Renovations & Retrofits · Somerset
Renovation Floor Screed in Somerton
Screed for renovations, retrofits and existing-property re-floors.
Get a fixed price for Renovation Floor Screed in Somerton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
For a Somerton renovation on TA11, liquid screed re-floors an old property without hand-mixing bay by bay. We usually pour bonded from 30mm on a sound existing slab, or unbonded on a fresh DPM.
Whether it's a full re-floor in a Somerton Georgian townhouse or a first-floor screed retrofit on a 1930s semi, we pump Cemfloor straight in without dismantling half the house.
Liquid screed for a Somerton renovation is often the fastest route back to a usable floor: bonded pour from 30mm, cover in the afternoon, back on the floor in 48 hours.
TA11 logistics and access for renovation screed pours
County
Somerset
District
Somerset
Postcode
TA11
Nearest city
Taunton (14 mi)
Nearest motorway
M5 (J25, ~15 mi)
Primary A-road
B3151
Sector focus
Renovation Floor Screed
Common local briefs
Georgian townhouses, stone cottages
Somerton briefs we see most in this sector
- Georgian and Victorian townhouse re-floors across Somerton
- 1930s semis with UFH retrofits in Somerton
- Barn and cottage conversions around TA11
- First-floor overlays where the existing slab stays down
- Ground-floor damp remediation projects in Somerton
Renovation Floor Screed in Somerton — how it works
Retrofit pours in Somerton usually go bonded — 30–40mm of Cemfloor on a sound, primed existing slab, ideal where door thresholds and stair heights are fixed. We prime, edge-isolate, pour, spike-roll, cover.
For fresh DPM builds on a Somerton renovation we pour 50–65mm unbonded. The heavier build-up gives UFH-friendly thermal storage and a proper barrier against ground moisture in older properties.
Cemfloor systems for this sector in Somerton
Cemfloor bonded system
From 30mm on primed existing slabs — ideal for {town} retrofits with fixed thresholds.
Cemfloor unbonded on DPM
50–65mm build-up for damp-remediation and thermal storage.
Priming coats
Applied on retrofit substrates for bond strength and dust suppression.
Perimeter isolation strip
Handles expansion around existing walls, hearths and cupboards.
Floors we've poured for this sector across Somerset
renovation screed in areas near Somerton
Proof from the Somerset renovation screed workload
renovation screed FAQs from Somerton clients
Will you quote from photos?+
No — retrofit pours punish blind quotes. We do a free site visit on every Somerton renovation.
How long before I can tile?+
For a 40mm bonded Somerton pour, usually 3–4 weeks to moisture-test target with reasonable ventilation.
Can you pour on old timber floors?+
Not usually — we recommend a plywood or fibreboard deck as substrate for first-floor overlays in Somerton renovations.
Will the new floor sit under my existing thresholds?+
We laser-check every threshold at the site visit and plan pour depth around them for Somerton renovations.
Do you supply insulation and DPM?+
Yes if the renovation needs a full build-up. On Somerton retrofits with fixed thresholds we usually pour direct on a primed substrate.
Is your price fixed?+
Yes — written fixed price once we've done the Somerton site visit and specified the build-up.
A Somerton renovation pour is planned on site, not from drawings. We'll turn up, look at what's there, and quote against what actually needs doing.
Renovation screed site visit — Somerton
Book a free Somerton site visit — we'll spec the build-up and quote a fixed price against it.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700