Garage Conversions & New Slabs · Devon
Newton Abbot Garage-Conversion Installers
Liquid screed for garage conversions and new garage floors.
Get a fixed price for Newton Abbot Garage-Conversion Installers
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Garage pours in Newton Abbot are small, awkward and important. Small because the room's usually 15–25m². Awkward because you're often pouring over an old slab that never expected to be a living-room floor. Important because the finish decides how the whole conversion feels.
A typical Newton Abbot garage-conversion pour is 20m² at 45mm, done inside two hours with a small pump line straight through the old garage door opening.
Garage floors in Newton Abbot used as workshops need a hard-wearing surface. Cemfloor CT-C30-F6 handles vehicle traffic, tool weight and dropped-spanner abuse.
Newton Abbot at a glance — the facts we plan around
County
Devon
District
Teignbridge
Postcode
TQ12
Nearest city
Exeter (18 mi)
Nearest motorway
M5 (J31, ~16 mi)
Primary A-road
A380 / A381
Sector focus
Garage Floor Screed
Common local briefs
Victorian railway terraces, big-box retail
Newton Abbot briefs we see most in this sector
- Garage-to-living-room conversions in Newton Abbot
- Garage-to-home-office conversions across TQ12
- New detached garage slabs around Newton Abbot
- Garage-to-utility-room pours in Newton Abbot
- Workshop and gym floors on Newton Abbot properties
Garage Floor Screed in Newton Abbot — how it works
Garage-conversion pours in Newton Abbot almost always go bonded — 40–50mm Cemfloor on the primed existing slab. Any low spots get filled first, so the floor reads level from door threshold to internal wall.
For new garage slabs in Newton Abbot the build-up runs full: 100mm PIR insulation, DPM, UFH clipped and pressure-tested, edge strip, then 65mm Cemfloor. Ready for foot traffic in 48 hours, tile or LVT once moisture-tested.
Cemfloor systems for this sector in Newton Abbot
Cemfloor CT-C30-F4
Standard garage-conversion mix, quick to trade back.
Cemfloor CT-C30-F6
Higher strength for {town} workshop and gym floors seeing heavy loading.
Primer + repair mortar
Applied on retrofit garage slabs for bond and levelling.
Perimeter edge strip
Continuous around walls and door threshold.
Floors we've poured for this sector across Devon
garage floor screed in areas near Newton Abbot
Proof from the Devon garage floor screed workload
garage floor screed FAQs from Newton Abbot clients
Can I leave it as an exposed floor?+
Yes — sealed and coated it works fine for Newton Abbot workshops, gyms and utility rooms.
How soon can I put down tile or LVT?+
For a 45mm Newton Abbot garage pour, usually 4–5 weeks to moisture-test target.
Can I use it as a workshop or gym?+
Yes — Cemfloor CT-C30-F6 handles heavy point loads and vehicle traffic on a Newton Abbot workshop floor.
Do I need UFH under the floor?+
Recommended for garage-to-living-room conversions in Newton Abbot. We work with your UFH installer on the pipe layout.
Do you supply the build-up for new garages?+
Optional — we'll price insulation, DPM and edge strip if you want a single sub on the floor package for your Newton Abbot garage.
Can you screed over my existing Newton Abbot garage slab?+
Usually yes — bonded from 40mm on a primed, sound existing slab. Site visit first to confirm the Newton Abbot garage floor is fit to bond.
A garage floor in Newton Abbot is small money and a big result. One morning, one crew, laser-flat — and the room's ready to be a room.
Book your Newton Abbot garage pour
Half-morning pours booked 2–4 weeks ahead across TQ12.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700