Underfloor Heating Screed · Devon
Thorverton Underfloor Heating Screed Specialists
Across Thorverton we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Get a fixed price for Thorverton Underfloor Heating Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Thorverton we work hand-in-hand with UFH installers — they lay and pressure-test the pipes, we pour around them the next day at the right depth and thermal performance.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Thorverton renovations.
Most of our Thorverton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Thorverton sits Exeter (9 mi), and we work the surrounding villages on the same week's diary.
Underfloor Heating Screed in Thorverton — how it works
For Thorverton UFH builds the typical sequence is: insulation board down, pipes clipped and pressure-tested, edge insulation in place, then we pump and level in a single visit.
Liquid UFH screed lets you run a thinner build-up than traditional bays — useful when ceiling heights or threshold levels are tight in Thorverton renovations.
EX5 access, routes and logistics
County
Devon
District
Mid Devon
Postcode
EX5
Nearest city
Exeter (9 mi)
Nearest motorway
M5 (J28, ~9 mi)
Primary A-road
A396
Local industries
agriculture, equestrian
Common builds
stone cottages, Exe-valley smallholdings
What Thorverton builds usually need
- Stone cottages — a regular brief in Thorverton
- Exe-valley smallholdings — a regular brief in Thorverton
- Barn conversions — a regular brief in Thorverton
- Agriculture — a regular brief in Thorverton
- Equestrian — a regular brief in Thorverton
Thorverton-area projects



Step-by-step for a Thorverton job
- 1
UFH installer fits manifold, pipes and pressure-tests to 6 bar
- 2
We confirm edge insulation, DPM and pipe coverage depth
- 3
Pump and level the screed with pipes still under pressure
- 4
Slow commissioning of the heating — usually after 7 days, ramping per manufacturer spec
- 5
Floor coverings once moisture is signed off and commissioning is complete
Why Thorverton clients pick us
Hundreds of square metres poured around Thorverton in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
Thorverton-area service radius
Cemfloor systems for Thorverton
Cemfloor Therm
Liquid screed engineered for UFH — lambda 2.1 W/mK, fast response.
PIR/Phenolic insulation board
70-150mm typical depending on build regs U-value target.
Edge insulation strip
Critical around UFH zones to allow thermal expansion.
Pressure-testing kit
Pipes held at 6 bar through the pour to flag any damage immediately.
What people in Thorverton usually ask
Can you screed over wet UFH and electric UFH?+
Yes — Cemfloor Therm encapsulates both. Electric mat systems usually take a thinner cover; wet pipes need the 50mm minimum.
When can I switch the underfloor heating on in Thorverton?+
On Cemfloor Therm we typically start a slow commissioning cycle from day 7, ramping 5°C per day per manufacturer spec. Forcing it earlier risks cracking, so we hold Thorverton clients to the schedule.
Will the screed crack as the UFH heats up?+
Properly isolated at the edges and at doorway joints, no. We pour with the pipes pressure-tested and follow a controlled commissioning schedule.
What if a pipe leaks during the pour?+
Pipes are held at 6 bar through the pour. Any pressure drop is flagged immediately and we stop, fix and continue — this is exactly why we keep the manifold under test.
What depth of screed over UFH pipes do you recommend?+
Minimum 50mm cover above the highest pipe — usually a 65-75mm total slab over insulation. Thicker if you want more thermal mass.
Does liquid UFH screed improve EPC ratings?+
Indirectly — yes. Faster response and lower running temperatures help heat-pump COP, which feeds into your SAP/EPC. We'll share the manufacturer data your assessor needs.
Ready for a laser-flat floor in Thorverton?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site
