Garage Floor Screed · Dorset
Garage Floor Screed Poured to SR1 in Symondsbury
Whether you're future-proofing a Symondsbury garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
Get a fixed price for Garage Floor Screed Poured to SR1 in Symondsbury
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Whether you're future-proofing a Symondsbury garage for an EV charger or finishing a workshop floor, liquid screed gives you the flatness and density coatings need to bond.
For Symondsbury garage conversions becoming habitable rooms, we'll also coordinate UFH and insulation build-up so the finished floor sits at the right level for thresholds.
Most of our Symondsbury jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Symondsbury sits Bridport (2 mi), and we work the surrounding villages on the same week's diary.
What Symondsbury builds usually need
- Symondsbury Estate cottages — a regular brief in Symondsbury
- Barn conversions — a regular brief in Symondsbury
- Estate workshops — a regular brief in Symondsbury
- Symondsbury Estate — a regular brief in Symondsbury
- Agriculture — a regular brief in Symondsbury
Who this is for in Symondsbury
Symondsbury sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
Garage Floor Screed in Symondsbury — how it works
A typical Symondsbury single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Materials and systems we use in Symondsbury
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
What to expect on pour day in Symondsbury
- 1
Site visit — assess the existing slab, falls, thresholds
- 2
Prep: clean, prime or lay DPM and insulation
- 3
Pump and level in a single morning
- 4
Cover for 24 hours, walk-on by day 2
- 5
Coatings or floor finishes once dry — typically 7-14 days
Floors poured around Symondsbury
Symondsbury-area service radius
Proof from the Dorset workload
Common Symondsbury build questions
Can liquid screed take an EV charger and a car's weight in Symondsbury?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Symondsbury garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Symondsbury garage, we form it in the substrate first, then screed at constant thickness.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Symondsbury site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Symondsbury diary.
How long before I can park on it?+
Light foot traffic by day 2, but we'd recommend at least 7 days before driving on, and longer if you're applying a finish on top.
Need Garage Floor Screed priced for Symondsbury?
Tell us the square metres and access notes. Most Symondsbury quotes go out the same day.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site