Renovation Screed · Devon
Renovation Screed Poured to SR1 in Clyst Honiton
Across Clyst Honiton we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Get a fixed price for Renovation Screed Poured to SR1 in Clyst Honiton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Across Clyst Honiton we lay overlay and replacement screeds for renovations from period cottages to 1960s semis, using thin-section liquid pours where ceiling heights or thresholds are constrained.
Old buildings move differently. We talk through movement joints at thresholds and against existing walls, so the new floor doesn't fight the old structure.
Most of our Clyst Honiton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Clyst Honiton sits Exeter (5 mi), and we work the surrounding villages on the same week's diary.
EX5 access, routes and logistics
County
Devon
District
East Devon
Postcode
EX5
Nearest city
Exeter (5 mi)
Nearest motorway
M5 (J29, ~3 mi)
Primary A-road
A30
Local industries
Exeter Airport, airport hotels
Common builds
airport-side offices, hangars
What Clyst Honiton builds usually need
- Airport-side offices — a regular brief in Clyst Honiton
- Hangars — a regular brief in Clyst Honiton
- Small estates — a regular brief in Clyst Honiton
- Exeter Airport — a regular brief in Clyst Honiton
- Airport hotels — a regular brief in Clyst Honiton
Renovation Screed in Clyst Honiton — how it works
Renovation pours typically run unbonded over insulation, with edge isolation against existing walls. We can lay from 35mm where headroom is tight, or full 65-75mm builds where the room can take it.
Where you're stripping back to a sound original slab in Clyst Honiton, we'll prep, prime and bond a thin liquid screed straight onto it from 30mm — no need to dig out.
Cemfloor systems for Clyst Honiton
Cemfloor CT-C30-F6 (thin-section)
Where minimum depth matters more than maximum mass.
Cemfloor Therm
Retro-fit UFH in renovation builds.
Acoustic underlay
Critical for {town} flat conversions where impact noise is a concern.
Self-levelling overlay primer
For bonded thin-section pours over existing slabs.
Latest jobs across Devon
Clyst Honiton-area service radius
What backs our Clyst Honiton work
Clyst Honiton screed questions, answered
What's the disruption like?+
Pump day is loud for a couple of hours. After that, the room is cordoned for 24-48 hours while the floor cures. We work clean and protect adjacent finishes.
Is liquid screed safe over a heritage property in Clyst Honiton?+
With proper edge isolation and movement joints, yes. We discuss any conservation-area or listed-building constraints up front.
Can you do a single room rather than the whole house?+
Yes — single-room renovation pours are a regular run for us across Clyst Honiton, with movement joints at the doorway to isolate from neighbouring rooms.
Will the screed stick to my old skirtings?+
We fit edge isolation strip against every wall before the pour — no bonding to skirtings, no risk to plaster.
Will it work with my new UFH retro-fit?+
Yes — Cemfloor Therm at 50mm above pipe gives you full UFH performance in a renovation build-up most original structures can accommodate.
Can you screed over my existing concrete floor in Clyst Honiton?+
Usually yes — if the slab is sound we bond a thin liquid screed straight on top from 30mm. We'll assess the Clyst Honiton substrate at the site visit and price accordingly.
If you're planning Renovation Screed in Clyst Honiton, the brief almost always comes down to flatness, dry-time and access — get those right and the trades behind you stay on programme.
Book your Clyst Honiton pour
Diary fills two to four weeks ahead. Pin a date now and we'll confirm logistics.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site