Traditional Sand & Cement Screed · Devon
Traditional Sand & Cement Screed in Bampton
For Bampton jobs where gypsum-based screed is ruled out, wet rooms, balconies, timber-sensitive junctions, we lay a semi-dry sand and cement mix, bay by bay, finished to SR2 with a hand float or power trowel.
EX16 coverage for traditional screed
From Bampton out to the surrounding villages, we carry both liquid and sand and cement screed crews, so you get the right one for the job.
See coverage07791 510849 WhatsApp usGet a fixed price for Traditional Sand & Cement Screed in Bampton
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
For Bampton jobs where gypsum-based screed is ruled out, wet rooms, balconies, timber-sensitive junctions, we lay a semi-dry sand and cement mix, bay by bay, finished to SR2 with a hand float or power trowel.
For Bampton wet rooms, balconies and any area with sustained water contact, sand and cement is usually the only sensible screed choice, since gypsum-based liquid screeds are not designed to tolerate standing water.
Most of our Bampton jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Bampton sits Tiverton (7 mi), and we work the surrounding villages on the same week's diary.
Right fit for Bampton rural self-builders and farms
Bampton sits rural — barn conversions, self-builds, agricultural sheds, equestrian floors. Access is usually fine, but power and water on site need confirming up front. We do that at the site visit.
EX16 access, routes and logistics
County
Devon
District
Mid Devon
Postcode
EX16
Nearest city
Tiverton (7 mi)
Nearest motorway
M5 (J27, ~14 mi)
Primary A-road
B3227 / A396
Local industries
Exmoor tourism, agriculture
Common builds
Exmoor-edge stone cottages, riverside conversions
Traditional Sand & Cement Screed in Bampton — how it works
We mix a semi-dry sand and cement screed on site or bring it in via a screed pump, lay it to string lines or laser-set pins in bays, then compact and trowel it to a flat, dense surface. It is slower than a liquid pour, roughly a day of drying time per millimetre of depth once you get past the first 50mm, but it tolerates a much wider range of site conditions.
Unlike a self-levelling liquid screed, sand and cement is placed and compacted by hand, so we control the fall towards a drain, form an upstand at a threshold, or feather it into an existing floor level in a way a pumped pour cannot.
How a Bampton pour runs
- 1
Site visit to assess substrate, falls, depth and access, since sand and cement can be barrowed where a pump truck cannot reach
- 2
Substrate prep, priming or DPM, and setting out of bay lines and laser levels
- 3
Mix and place the screed in bays, compacting as we go to remove voids
- 4
Hand float or power trowel to a flat, dense SR2 finish
- 5
Protect and allow to cure, typically a day per millimetre of depth after the first 50mm
- 6
Follow-up inspection before floor coverings or tiling begin
Latest jobs across Devon
Specifications suited to Bampton builds
Sand and cement (typically 4:1 or 5:1 mix)
Semi-dry, hand-compacted mix ratio adjusted to depth and loading.
SBR bonding agent
Slurry-brushed onto the substrate for bonded screeds under 40mm.
Polypropylene fibre reinforcement
Added to reduce shrinkage cracking on larger bays.
DPM and separating membrane
For unbonded or floating screeds over insulation.
Falls formed to drain outlets
Built into the screed thickness for wet rooms and balconies.
Edge and movement joints
Set at bay lines, doorways and around columns.
Bampton-area service radius
Bampton screed questions, answered
Can you lay sand and cement screed externally in Bampton?+
Yes, external thresholds, patios tying into internal floor levels and step-downs are common sand and cement jobs, since the mix tolerates exposure that a liquid screed is not designed for.
Will the screed crack?+
Bay joints and fibre reinforcement control shrinkage cracking. We set bay sizes and joint positions at doorways and depth changes to minimise the risk on any Bampton job.
How is sand and cement screed different from liquid screed in Bampton?+
Sand and cement is a semi-dry mix, hand-laid and trowelled in bays, whereas liquid screed is pumped and self-levels. Sand and cement suits deep fills, external areas and wet rooms; liquid screed suits large flat internal floors that need to dry quickly.
What SR rating do you achieve on a trowelled screed?+
We finish sand and cement to SR2, within 3mm under a 2m straight edge, which is suitable for most tiled finishes. If you need SR1 flatness for large-format tile or resin, liquid screed is usually the better route.
Can you match an existing sand and cement floor level?+
Yes, we set datums off your existing finished floor level and build the new screed to match, allowing for whatever covering goes on top.
Do you use a screed pump for sand and cement in Bampton?+
On larger jobs, yes, a screed pump can deliver the semi-dry mix into the building, which speeds up placement while keeping the hand-trowelled finish.
What backs our Bampton work
Hundreds of square metres poured around Bampton in the last 12 months
Single-team continuity — same crew, same standards, every job
Written fixed-price quotes — no day-rate creep
Moisture-test handover record so flooring contractors take the slab on without dispute
EX16 coverage for traditional screed
From Bampton out to the surrounding villages, we carry both liquid and sand and cement screed crews, so you get the right one for the job.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site