Garage Floor Screed · Dorset
Abbotsbury Garage Floor Screed Specialists
Abbotsbury garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Get a fixed price for Abbotsbury Garage Floor Screed Specialists
30 seconds. We'll come back same-day with a fixed price and next available date.
Or call our landline on 01392 237700
Abbotsbury garage conversions and new garages need a floor that's flat enough for a polyurea or epoxy finish — that's a job for liquid screed, not hand-trowelled mortar.
Liquid screed over a garage slab leaves a surface flat enough for direct application of two-pack epoxy, polyurea or polyaspartic floor coatings — no further levelling compound required.
Most of our Abbotsbury jobs sit within 30 minutes of base, so site visits stay simple and pour days run to time. Abbotsbury sits Dorchester (9 mi), and we work the surrounding villages on the same week's diary.
DT3 access, routes and logistics
County
Dorset
District
Dorset
Postcode
DT3
Nearest city
Dorchester (9 mi)
Nearest motorway
M5 (J25, ~50 mi)
Primary A-road
B3157
Local industries
tourism lets, harbour trades
Common builds
seafront apartments, 1930s coastal semis
What Abbotsbury builds usually need
- Seafront apartments — a regular brief in Abbotsbury
- 1930s coastal semis — a regular brief in Abbotsbury
- Harbourside conversions — a regular brief in Abbotsbury
- Guest-house retrofits — a regular brief in Abbotsbury
- Tourism lets — a regular brief in Abbotsbury
Garage Floor Screed in Abbotsbury — how it works
A typical Abbotsbury single-garage floor of 18-24m² is poured and finished in well under a morning, with the pump set up on the driveway.
We assess the existing slab, prep with shot-blasting or grinding where needed, lay edge isolation and a DPM if unbonded, then pump and level the screed in a single visit.
Cemfloor systems for Abbotsbury
Cemfloor CT-C30-F6
Cement-based screed — robust, coating-ready surface.
Bonding primer
For bonded pours over existing slabs.
DPM and slip membrane
For unbonded over insulation or older slabs.
Shot-blasting / grinding prep
Where the existing slab needs surface profile.
Floors poured around Abbotsbury
Abbotsbury-area service radius
Proof from the Dorset workload
Common Abbotsbury build questions
Can liquid screed take an EV charger and a car's weight in Abbotsbury?+
Yes — a properly specified 40-50mm liquid screed easily handles domestic vehicle loads. We'll size the build-up to your Abbotsbury garage usage.
Will it slope to a drain?+
Liquid screed self-levels — it won't form a fall. If you need a drain fall in your Abbotsbury garage, we form it in the substrate first, then screed at constant thickness.
What about cold garages — will it cure?+
We won't pour below 5°C. For winter jobs we'll either heat the space or schedule for a mild day in your Abbotsbury diary.
Do you tidy up afterwards?+
Wash-out is bagged and removed. We leave the Abbotsbury site clean and the floor protected with sheeting.
Can I finish the floor with epoxy?+
Absolutely — liquid screed gives you a flat, dense base that resin coatings bond to well once the screed is dry and the surface laitance is sanded off.
Is it noisier than sand-and-cement?+
Pump day is loud for an hour or two while the truck and pump run on the driveway. After that, nothing.
From the first site visit to the final laitance sand, our Abbotsbury jobs are run as one fixed-price piece of work — no creeping extras.
Ready for a laser-flat floor in Abbotsbury?
Send us the floor area, build-up and target dates — we'll come back with a fixed quote and a date.
Ready to get a price?
Tell us the rough size and location — we'll come back with a fixed quote today.
Or call our landline on 01392 237700
Related on this site